When it comes to how to use a charging drill, I believe that carpentry and decoration will be used. But in life, we are not engaged in woodworking, decoration, and it is possible to use a hand drill

Wait, such as: home bought a mirror needs to hang on the wall, it needs to punch holes on the wall, when someone borrowed a drill but will not use, it is inevitable a little embarrassing. Come here

Share what is the use of the charging drill:

1. Hold both ends of the battery and insert the battery into the battery compartment.

2. Insert the drill nozzle into the drill port and tighten it clockwise.

3. Press the index finger up, press to the top, when it is raised, it is the direction of the forward gear, and punch and play the screw with this gear; Push your thumb down, down to the bottom, concave

It is the back gear, and this gear is used to pull out and unscrew the rehole.

4, the ring marked with numbers, is to adjust the force. The larger the number, the greater the force, adjust the scale on the drill to the right force. Generally, the punch needs to be adjusted to the maximum

Big enough to make it work.

5. Finally, align the hole to be played, grip the electric drill with your hand (it must be firmly held), and press the control switch to use.